• 18764172899
                          0531一85977876

                        • [field:companyname]
                          全國咨詢熱線
                        當前位置:首頁 - 新聞資訊 > 行業新聞 >

                        有哪些措施可以防止斷橋鋁門窗設備在運輸過程中的損壞?

                        來源:http://www.yusuki.com/ 發布時間:2022-02-25
                        門窗設備生產廠家擔心的問題莫過于門窗設備在運輸過程中的損壞,其損失之慘重讓廠家心疼不已,那么有哪些措施可以防止斷橋鋁門窗設備在運輸過程中的損壞呢?
                        The manufacturer of door and window equipment is worried about the damage of door and window equipment during transportation. The heavy loss makes the manufacturer feel distressed. What measures can be taken to prevent the damage of bridge broken aluminum door and window equipment during transportation?
                        預防斷橋鋁門窗設備損壞的措施有哪些?
                        What are the measures to prevent the damage of bridge broken aluminum doors and windows?
                        1、斷橋鋁門窗加工設備應后安裝,門窗鎖、拉手等應在窗放入框后再組裝,保證位置正確,開關靈活。
                        1. The processing equipment of broken bridge aluminum doors and windows shall be installed after installation, and the door and window locks and handles shall be assembled after the window is put into the frame to ensure correct position and flexible switch.
                        2、斷橋鋁門窗設備安裝后要注意保養,防止生銹腐蝕。在日常使用時要輕關輕開,防止硬關硬開,造成損壞。
                        2. Pay attention to maintenance after installation of bridge broken aluminum door and window equipment to prevent rust and corrosion. In daily use, it is necessary to close and open gently to prevent damage caused by hard closing and hard opening.
                        3、用緊固螺絲安裝斷橋鋁加工設備,需要內設金屬襯板,襯板厚度至少應大于緊固件牙距的兩倍。不得緊固在塑料型材上,也不得采用非金屬內襯。
                        3. To install the broken bridge aluminum processing equipment with fastening screws, a metal lining plate shall be set inside, and the thickness of the lining plate shall be at least twice the tooth pitch of the fastener. It shall not be fastened on plastic profiles or non-metallic lining.
                        造成斷橋鋁門窗設備損壞的原因:斷橋鋁加工設備選擇不當,質量低劣;緊固時未設金屬襯板,沒有足夠的安裝強度。所以大家在選擇斷橋鋁門窗加工設備的時候一定要選擇質量好的門窗設備。
                        Reasons for damage of broken bridge aluminum door and window equipment: improper selection of broken bridge aluminum processing equipment and poor quality; There is no metal lining plate during fastening, and there is not enough installation strength. Therefore, when choosing the processing equipment of broken bridge aluminum doors and windows, we must choose the door and window equipment with good quality.
                        以上就是今天帶給大家的知識,系統門窗加工設備專注行業多年,為用戶不斷的提供有價值的內容,更多內容請繼續關注我們:http://www.yusuki.com
                        The above is the knowledge brought to you today. The system door and window processing equipment has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://www.yusuki.com