• 18764172899
                          0531一85977876

                        • [field:companyname]
                          全國咨詢熱線
                        當前位置:首頁 - 新聞資訊 > 公司動態 >

                        門窗設備的保養很重要

                        來源:http://www.yusuki.com/ 發布時間:2022-02-23
                        門窗在我們的日常生活中經常使用。斷橋鋁門窗設備是門窗生產加工中不可缺少的設備,給門窗的生產加工帶來了便利。在日常工作中,設備的維護非常重要。你知道如何維護斷橋鋁門窗設備嗎?我們來看看。
                        Doors and windows are often used in our daily life. Broken bridge aluminum doors and windows equipment is an indispensable equipment in the production and processing of doors and windows, which brings convenience to the production and processing of doors and windows. In daily work, equipment maintenance is very important. Do you know how to maintain the broken bridge aluminum door and window equipment? Let's have a look.
                        每天及時清理機床和導軌的污垢,保持床身清潔。定期檢查各機構部件、緊固件,防止松動,定期檢查設備接地是否牢固。定位板和上下壓鉗的工作面和鉗口應保持清潔,無油污,每班擦拭。及時去除落在鋸床上的碎屑,確保電氣元件動作準確。
                        Clean the dirt of the machine tool and guide rail in time every day to keep the bed clean. Regularly check the components and fasteners of each mechanism to prevent loosening, and regularly check whether the equipment is grounded firmly. The working surface and jaws of the positioning plate and the upper and lower pressing tongs shall be kept clean and free of oil stain, and shall be wiped every shift. Timely remove the debris on the sawing machine to ensure the accurate action of electrical components.
                        各滑動機構應選擇無油潤滑軸承或直線運動軸承,注意觀察機器的水平、縱向導軌和齒條表面是否有潤滑油,并定期潤滑各部件。設備所在場地的供電系統應定期維護,電纜接頭應可靠絕緣,并用膠帶包扎。聚四氟乙烯焊布包裹在加熱板上,應定期更換。經常檢查所有按鈕和選擇開關的性能,如有損壞及時更換。
                        Each sliding mechanism shall select oil-free lubricating bearing or linear motion bearing, pay attention to observe whether there is lubricating oil on the horizontal and longitudinal guide rails and rack surfaces of the machine, and lubricate all parts regularly. The power supply system at the site where the equipment is located shall be maintained regularly, and the cable joints shall be reliably insulated and wrapped with adhesive tape. The Teflon welding cloth is wrapped on the heating plate and should be replaced regularly. Regularly check the performance of all buttons and selector switches, and replace them in time if they are damaged.
                        及時清理落在鋸床上的碎屑,確保電氣元件動作準確。氣源處理器中分水濾氣器的濾芯和儲水杯應定期清洗和放水。電箱內應保持清潔干燥,周圍不應有潮濕或腐蝕性氣體,以免損壞設備。如果不使用長期密封,應在包裝前進行防銹處理,以避免腐蝕。
                        Clean up the debris falling on the sawing machine in time to ensure the accurate action of electrical components. The filter element and water storage cup of the water separation air filter in the air source processor shall be cleaned and drained regularly. The electric box shall be kept clean and dry, and there shall be no wet or corrosive gas around it to avoid damaging the equipment. If long-term sealing is not used, rust prevention treatment shall be carried out before packaging to avoid corrosion.
                        以上就是今天帶給大家的知識,數控門窗設備專注行業多年,為用戶不斷的提供有價值的內容,更多內容請繼續關注我們:http://www.yusuki.com
                        The above is the knowledge brought to you today. CNC door and window equipment has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://www.yusuki.com