• 18764172899
                          0531一85977876

                        • [field:companyname]
                          全國咨詢熱線
                        當前位置:首頁 - 新聞資訊 > 公司動態 >

                        鋁型材數控雙頭精密切割鋸的特點

                        來源:http://www.yusuki.com/ 發布時間:2022-01-13
                        本機主要由床身,左、右鋸頭、操作臺,托料架、氣動系統、電氣系統、數控系統等部分組成。
                        The machine is mainly composed of bed, left and right saw heads, console, material support frame, pneumatic system, electrical system, numerical control system, etc.
                        1.鋸頭
                        1. Saw head
                        左鋸頭為固定鋸頭,右鋸頭為活動鋸頭,可通過移動右鋸頭用雙鋸頭同時切割不同長度的型材。每個鋸頭分別有擺角結構、傳動系統、工作臺、工進夾緊系統、鋸片、鋸罩等組成。
                        The left saw head is a fixed saw head and the right saw head is a movable saw head. By moving the right saw head, double saw heads can be used to cut profiles of different lengths at the same time. Each saw head is composed of swing angle structure, transmission system, worktable, work advance clamping system, saw blade, saw cover, etc.
                        擺角機構主要通過定位氣缸確定擺角角度。
                        The swing angle mechanism mainly determines the swing angle by positioning the cylinder.
                        工作臺用于型材的支撐、定位及其他輔助功能,鋸罩起防 護及集屑功能。
                        The worktable is used for the support, positioning and other auxiliary functions of profiles, and the saw cover has the functions of protection and chip collection.
                        2.床身
                        2. Bed
                        床身由低碳鋼板經壓彎成型后焊接而成,內部有加強筋板,焊接后經時效處理,保證了床身有足夠的鋼性及穩定性。機架底部安裝有調平底座,用于機身工作臺水平調整。
                        The bed is welded from low-carbon steel plate after bending and forming. There are stiffeners inside. After welding, it is aging treated to ensure that the bed has sufficient rigidity and stability. A leveling base is installed at the bottom of the frame for horizontal adjustment of the worktable of the fuselage.
                        數控門窗設備
                        3.操作臺
                        3. Console
                        操作臺安裝于床身前,操作臺在水平面內可以橫向移動,操作者可靈活選擇操作位置。
                        The console is installed in front of the bed. The console can move laterally in the horizontal plane, and the operator can flexibly select the operation position.
                        操作控制元件裝于操作臺上,切割型材時,操作人員須按操作程序按動按鈕,以完成型材的切割加工
                        The operation control element is installed on the console. When cutting profile, the operator must press the button according to the operation procedure to complete the cutting of profile
                        4.托料架
                        4. Material support
                        托料架主要用在切割長型材時,輔助托料使用。
                        The material support frame is mainly used for cutting long profiles and auxiliary material support.
                        產品系統說明
                        Product system description
                        1.氣動控制系統
                        1. Pneumatic control system
                        氣動控制原理,壓縮空氣經氣源處理器處理后,進入各氣動元件,該系統主要完成動作:工件夾緊、鋸片進給、鋸片退回,工件松開。
                        Pneumatic control principle: after being processed by the air source processor, the compressed air enters each pneumatic element. The system mainly completes the actions: workpiece clamping, saw blade feeding, saw blade returning and workpiece loosening.
                        2.工件夾緊
                        2. Workpiece clamping
                        工件的夾緊是通過單作用氣缸實現的。電磁閥通電后,二位五通電磁閥換向,壓縮空氣進入單作用氣缸,工件被夾緊;鋸片切割完畢,鋸頭退回碰到行程開關,電磁閥斷電換向,控制夾緊氣缸松開,整個加工工序完畢。
                        The clamping of workpiece is realized by single acting cylinder. After the solenoid valve is energized, the two position five way solenoid valve reverses, the compressed air enters the single acting cylinder, and the workpiece is clamped; After the saw blade is cut, the saw head returns and touches the travel switch, the solenoid valve is powered off and reversed, the control clamping cylinder is loosened, and the whole processing process is completed.
                        3.鋸片進給
                        3. Saw blade feeding
                        電磁閥通電后換向,壓力空氣進入氣缸后腔使鋸片前進;電磁閥斷電,二位五通電磁閥復位,壓力空氣進入氣缸前腔,鋸片退回。
                        After the solenoid valve is energized, it reverses, and the pressure air enters the rear chamber of the cylinder to move the saw blade forward; The solenoid valve is powered off, the two position five way solenoid valve is reset, the pressure air enters the front chamber of the cylinder, and the saw blade returns.
                        4.電氣控制系統
                        4. Electrical control system
                        電路控制系統由主電路和控制電路組成。
                        The circuit control system consists of main circuit and control circuit.
                        5.數控系統
                        5. CNC system
                        數控系統由觸控屏,伺服電機等組成。
                        The CNC system consists of touch screen, servo motor, etc.